Making homemade picks is easier than you think. In this article, I will explain how to make guitar picks from home.
Let’s be honest, picks are super cheap. But the problem is not in the cost, but rather in the fact that many times we need a pick and we do not have it on hand. Plus, if you’re like me, you lose them quite often. Below everything I give a tip so as not to lose them.
Guide
How to make guitar picks?1. Choose a plastic or synthetic base material Credit Card SIM Container CDs or DVDs Rule Any hard plastic
2. Draw the outline of the pick3. Cut the spikeScissorsBarb cutter
4. Sand the edges5. Ready, start playing with your new pick.Guitar picks: Tip to avoid losing themConclusions: How to make guitar picks
How to make guitar picks?
To make a guitar pick, you will only need a little creativity. In fact, there are hundreds of ways to make a pick. But this time, I will show you the steps to make a pick, and 5 different materials that you can use to make them.
Steps to make a pick:
- Choose a plastic or synthetic base material.
- Draw the outline of the spike on the plastic.
- Trim the spike with scissors or a spike cutter.
- Sand the edges of the pick to soften its edge.
- Ready, start playing with your new pick.
1. Choose a plastic or synthetic base material
The first step will be to choose a synthetic base material. Here I will give you 5 different ideas to make a pick.
Credit Card
Credit cards have a very friendly plastic for making picks. If you have expired credit or debit cards, this is an excellent option. If you don’t have a bank card, you can apply for one at your nearest bank and order a new card. When they ask you what you are going to use it for, tell them to make a pick. I’m just kidding 🙂
SIM container
Mobile phone SIMs are getting smaller and smaller. But its container always comes the same size. Your card container will be a very good base to make your next pick.
CDs or DVDs
Be honest, no one uses CDs or DVDs anymore. You can get rid of your old CDs and use them to make a pick. Also, if you like the CD cover, you will have an excellent pick with the image of your favorite CD. Of course there is a sacrifice which is to break the CD. But in case it no longer works, it will come in handy.
Rule
You can also choose an old rule from when you went to school. The ruler is a pretty hard plastic, so if you like strong spikes, this is your best option. The cut will be a little more complicated.
Any hard plastic
In case you do not have any of the 4 previous options, you can use any plastic you find in your house. Shopping membership cards, clubs, etc., are also special for making picks. There are no rules to being creative.
2. Draw the outline of the pick
The next step will be to draw the outline of the pick in the material you chose.
To draw the material you can:
- Improvise it by hand.
- Take another pick that you have and draw the outline.
- Print this pick template on an A4 sheet, select a model of your choice, cut it and use it as a mold.
3. Cut the spike
To cut the spike you have two main options.
Scissors
We all have a scissors in our house. Choose a scissors that has a good sharpness.
Barb cutter
The pick cutter is an accessory for making unlimited guitar picks. You probably remember the hole cutter you used in school. Well, this is the same but for spikes. With this accessory, you can make picks in one touch. It is the most recommended method since the contour of the pick will be perfect. Of course, if you choose this option, you will not need to do the previous step of drawing the outline.–> See barbed cutter offers
4. Sand the edges
Once you have your pick, you will see that the edges are very sharp. You should know that this is not good as it can cut your ropes. To smooth the edge of the pick, you can use any sandpaper you find around the house. Sand the edges well until they are smooth to the touch.
5. Ready, start playing with your new pick.
And this is it, you will have a new and beautiful pick. Totally free and from your home. You can start playing again with your pick.
Guitar picks: Tip to avoid losing them
If you’re one of me, you’re probably used to losing your quills. You put them near the chair and then they disappear. In case you are tired of losing them, I have a solution for you. The pick holder or pick holder. With this accessory you can store all your picks. It also has an adhesive back to stick it to your guitar to avoid forgetting them.
It is a very useful accessory for the guitar and it is super cheap. You can get it on Amazon at this link.
Conclusions: How to make guitar picks
Making a pick is not only original, but it’s also fun to make. And it can save you at any time. Having to go to the store and get picks can be too time consuming if you need them now. Any type of plastic material will work to make a pick. Consider whether you feel more comfortable with soft or hard picks, to also choose the hardness of the plastic. Anyway, you can try different types and find the right one. The pick cutter accessory is excellent because it allows you to make unlimited picks in just a few seconds. If you are not very good with scissors, this option will be good for you. And lastly, once you make them, make sure you don’t lose them. The pick holder can be a very good option to store them all in the same place.
Keep reading:
How to connect guitar to PC: Complete Guide
Accessories that every guitarist should have
Best acoustic guitar brands
How to use the capotraste on the guitar
Connect guitar to Android phone